The rear shock absorber is crucial for ride comfort and stability, but also for driving safety, especially in microcars where the suspension system is particularly sensitive. In this guide, we explain step-by-step how to replace the rear shock absorber on models like Ligier and Microcar, but the same method applies to Aixam, Chatenet, JDM, Casalini, and Grecav.
At minicarspares, you’ll find shock absorbers for your microcar – perfect fit for your microcar and always at a great price.
Required Equipment and Safety
- Socket wrench size 19
- Socket size 19
- 2-post lift or jack with jack stands
- Protective gloves
Time Required
- 1 side: approx. 20 minutes
- 2 sides: approx. 40 minutes
Step-by-step: How to Replace the Rear Shock Absorber
1. Lift the car and remove the wheel
- Safely lift the rear of the car using a lift or jack.
- Unscrew the four wheel nuts.
- Remove the wheel.
2. Remove the shock absorber
- Unscrew the upper bolt that holds the shock absorber to the chassis.
- Then, unscrew the lower bolt at the wheel suspension.
- Pull out the entire shock absorber.
3. Install the new shock absorber
- Install the new shock absorber in the same position.
- Reinstall and tighten both the upper and lower bolts.
- Put the wheel back on and tighten the wheel nuts.
Order quickly and easily from minicarspares – we have shock absorbers and other spare parts for all microcars.